Electrolux ECCI3668AS Installation Instructions English - Page 2
and serial numbers and a lot number or letter from
View all Electrolux ECCI3668AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
INDUCTION COOKTOP INSTALLATION INSTRUCTIONS Overhead Cabinet Should Not Exceed a Maximum Depth of 13" (33 cm) 30" (76.2 cm) Min. Clearance Between the Top of the Cooking Platform and the Bottom of an Unprotected Wood or Metal Cabinet 24" (61 cm) Min. when Bottom of Wood or Metal Cabinet is Protected by Not Less Than 1/8" (0.3 cm) Flame Retardant Millboard Covered With Not Less Than No. 28 MGS Sheet Steel, 0.015" (0.4 mm) Stainless Steel, 0.024" (0.6 mm) Aluminum or 0.020" (0.5 mm) Copper. L Min. K Min. Recommended Distance Between Rear Edge of Cutout and Nearest Combustible 10" Surface Above ( 25.4 cm) Countertop 18" F (45.7 cm) H G 24" (61 cm) 12" (30.5 cm) J Min. From Edge of Cooktop to Nearest Combustible Wall (Either Side of Unit). * Letters on this figure refer to chart on front page except for J and K. Approximate Location of Junction Box 2½" (6.4 cm) Min. From Edge of Cutout to Front Edge of Countertop It is not recommended to use drawer underneath cooktop. Empty space is needed for installation purpose. Figure 2 - COUNTERTOP CUTOUT OPENING CAUTION To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space located above the cooktop should be avoided. If cabinet storage is provided, risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets. MODEL 30" 36" J 2" (5.1cm) 2" (5.1cm) K 1 1/2" (3.8cm) 2" (5.1cm) L 30 5/8" (77.8cm) 36 3/4" (93.4cm) Model and Serial Number Location The serial plate is located under the cooktop. When ordering parts for or making inquires about your cooktop, always be sure to include the model and serial numbers and a lot number or letter from the serial plate on your cooktop. Serial plate is located under the burner box of cooktop. 2