Electrolux ECCG3668AS Quick Start Guide English - Page 2

Care and Cleaning

Page 2 highlights

Using the Griddle Your cooktop has two standard sized burners on the left side that can be used to heat larger cookware like the griddle. 1. Center the griddle over the left side gas burners. 2. Preheat the griddle for 5 minutes on medium to medium‑low setting. The reversible griddle is ceramic-coated cast iron. Use non‑stick cooking spray or oil as needed. Slowly preheating the griddle ensures even heat distribution for best cooking results. We recommend hand washing the griddle with a stiff brush and very hot water. Use a little soap if needed, and rinse well. Dry with a lint-free cloth and store in a dry place. The griddle is dishwasher-safe. Care and Cleaning Protect your cooktop by quickly cleaning up spills when they happen. Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop burners are cool. For general cleaning, wipe with a clean, damp cloth and wipe dry to avoid scratches. For instructions on how to clean your cooktop grates and burners, refer to your Use & Care Manual. FAQs • Why is my gas cooktop not working? Make sure your cooktop knob is turned to LITE when turning on the surface burner. Check to make sure your cooktop burner ports aren't clogged. Your Use & Care Manual has instructions on how to properly clean your cooktop burners. • Why is the burner flame uneven? Clogged burner ports or slots can cause uneven flames. Check to make sure the cooktop burners are installed and placed correctly. Burner caps should be level and seated correctly on the burner heads. • Why is my burner flame too high? The cooking setting may be too high. Use your cooktop knob to reduce to a lower setting. Burner caps not placed properly can cause the flame to be too high. Check the fit of the burner caps by sliding it side to slide when the cooktop is cool. An incorrect LP conversion of your cooktop can also cause the flame to be too high. Refer to the conversion kit instructions that came in your literature pack. Always refer to your Use & Care Manual for more tips and instructions. Sustainability, together We're committed to more sustainable eating from how we store foods to how we prepare them. 2208-CR8JCQ7HPS PHOTOREGISTERSM Peace of Mind & Protection Discover more benefits by registering your appliance. Text the photo icon on your appliance or registration card, or visit us online to register. ElectroluxAppliances.com (877) 435-3287 10200 David Taylor Drive Charlotte, NC 28262 ElectroluxAppliances.ca (800) 265-8352 5855 Terry Fox Way Mississauga, ON L5V 3E4

  • 1
  • 2

FAQs
• Why is my gas cooktop not working?
Make sure your cooktop knob is turned to LITE when turning on the surface burner. Check to make sure your
cooktop burner ports aren't clogged. Your Use & Care Manual has instructions on how to properly clean your
cooktop burners.
• Why is the burner
flame une
ven?
Clogged burner ports or slots can cause uneven
flames.
Check to make sure the cooktop burners are
installed and placed correctly. Burner caps should be level and seated correctly on the burner heads.
• Why is my burner
flame
too high?
The cooking setting may be too high. Use your cooktop knob to reduce to a lower setting.
Burner caps not placed properly can cause the
flame
to be too high. Check the
t of the burner caps by
sliding it side to slide when the cooktop is cool.
An incorrect LP conversion of your cooktop can also cause the
flame
to be too high. Refer to the conversion
kit instructions that came in your literature pack.
Sustainability,
together
ElectroluxAppliances.com
(877) 435-3287
10200 David Taylor Drive
Charlotte, NC 28262
ElectroluxAppliances.ca
(800) 265-8352
5855 Terry Fox Way
Mississauga, ON L5V 3E4
We're committed to more
sustainable eating from how
we store foods to how we
prepare them.
Always refer to your Use & Care Manual for more tips and instructions.
Peace of Mind & Protection
Discover more bene
ts by registering your appliance. Text the
photo icon on your appliance or registration card, or visit us
online to register.
2208-CR8JCQ7HPS
PHOTOREGISTER
SM
Protect your cooktop by quickly cleaning up spills when they happen.
Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop burners are cool.
For general cleaning, wipe with a clean, damp cloth and wipe dry to avoid scratches. For instructions on how to
clean your cooktop grates and burners, refer to your Use & Care Manual.
Care and Cleaning
Using the Griddle
Your cooktop has two standard sized burners on the left side
that can be used to heat larger cookware like the griddle.
1.
Center the griddle over the left side gas burners.
2.
Preheat the griddle for 5 minutes on medium to
medium-low setting.
The reversible griddle is ceramic-coated cast iron. Use
non-stick cooking spray or oil as needed. Slowly preheating the
griddle ensures even heat distribution for best cooking results.
We recommend hand washing the griddle with a sti
brush and very hot water. Use a little soap if needed, and
rinse well. Dry with a lint-free cloth and store in a dry place. The griddle is dishwasher-safe.