EdgeStar KC3000TWIN Owner's Manual

EdgeStar KC3000TWIN Manual

EdgeStar KC3000TWIN manual content summary:

  • EdgeStar KC3000TWIN | Owner's Manual - Page 1
    SAFETY PRECAUTIONS Read all of the instructions before using this appliance. When using this supply cord or the dispensing tap.  Keep the power supply cord away from heating surfaces.  Service only by authorized technicians.  Do not immerse the appliance or its power supply cord in water or
  • EdgeStar KC3000TWIN | Owner's Manual - Page 2
    our customer service...  Read this manual: it contains instructions to help you use and maintain your portable Draft Beer Dispenser properly.  If you received a damaged appliance: please contact the dealer that sold you the appliance immediately.  Read the section titled troubleshooting: in order
  • EdgeStar KC3000TWIN | Owner's Manual - Page 3
    the Beer 7 OPERATING YOUR BEER DISPENSER Grounding Instructions Setting the Correct Pressure for the CO2 Regulator Setting Guide Converting the Beer Dispenser to an All-Refrigerator 8-13 8 8 9 10 10 11 12 12 12 13 13 CLEANING AND MAINTAINING YOUR DRAFT BEER DISPENER.... 13 TROUBLESHOOTING
  • EdgeStar KC3000TWIN | Owner's Manual - Page 4
    Accessories Suggested accessories include: A cleaning kit Different types of taps And more... For more information on compatible accessories, feel free to email [email protected] or call toll-free 866-319-5473. Proper Location This appliance is designed for "indoor" use only and should not be
  • EdgeStar KC3000TWIN | Owner's Manual - Page 5
    ASSEMBLY INSTRUCTIONS Installing the Casters 1. With the contents inside the cabinet removed set the beer dispenser on its side. 2. Insert each caster into the holes on the
  • EdgeStar KC3000TWIN | Owner's Manual - Page 6
    , which can be hazardous if handled improperly. Please handle with care. Note This section describes general CO2 and keg installation. For specific instructions, see the instructions included in the accessory box. 1. To install the CO2 gas line tube to the regulator, attach one end of the CO2 tube
  • EdgeStar KC3000TWIN | Owner's Manual - Page 7
    European beers require a different tap. Please contact EdgeStar customer service online via email at [email protected] or by telephone at 1-866-319-5473 Carefully tilt the beer keg and rest the edge on the metal keg floor support on the bottom of the interior cabinet. Slide the beer keg in slowly,
  • EdgeStar KC3000TWIN | Owner's Manual - Page 8
    OPERATING YOUR FRIDGE & BEER DISPENSER Grounding Instructions  This appliance's plug must be grounded. In the event of a malfunction or breakdown, more CO2 will be absorbed into the beer. Initially, this will not cause any problems, but over time this will result in over-pressurized foamy beer. 8
  • EdgeStar KC3000TWIN | Owner's Manual - Page 9
    Setting the Regulator EdgeStar's Draft Beer Dispenser comes with a single gauge CO2 gas regulator that has a 0-60 lb. pressure gauge showing the gas output pressure. Once the regulator is
  • EdgeStar KC3000TWIN | Owner's Manual - Page 10
    the average glass should be ¾" to 1" high. Beer Clean Glasses We recommend that you reserve a set of glasses specifically to the enjoyment of your EdgeStar Draft Beer Dispenser. Do not wash beer glasses together with glasses that have contained milk or any other fatty substances. Using a glass for
  • EdgeStar KC3000TWIN | Owner's Manual - Page 11
    . Such thermometers are enclosed in a casing filled with liquid; this provides a constant accurate reading of the liquid (beer) temperature within the refrigerator. Contact EdgeStar customer service online via email at [email protected] or by telephone at 1-866-319-5473 for more information. 11
  • EdgeStar KC3000TWIN | Owner's Manual - Page 12
    Understanding the Temperature Control Setting This kegerator has a cooling range of 32-50 °F (0-10 °C). Press the cooler or warmer buttons to adjust temperature by 1°. Press the F/C button to switch between Fahrenheit or Celsius. Press Deep Chill to activate the quick cooling feature of this
  • EdgeStar KC3000TWIN | Owner's Manual - Page 13
    Beer Serving Guide What a half barrel ( power. Place your refrigerator in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more CONTACT EDGESTAR CUSTOMER SERVICE ONLINE VIA EMAIL AT [email protected] OR BY TELEPHONE AT 1-866-319-5473.
  • EdgeStar KC3000TWIN | Owner's Manual - Page 14
    TROUBLESHOOTING THE BEER DISPENSER Problem Excess formation of foam "head." Beer, when drawn is all foam, or too much foam and not enough liquid beer. Flat Draft, no formation of
  • EdgeStar KC3000TWIN | Owner's Manual - Page 15
    and connector nuts and inspect stem for possible damage. See "Cleaning and Maintenance" Check hoses for possible air leaks. Replace Beer Keg TROUBLESHOOTING YOUR REFRIGERATOR The refrigerator is not working - Check that the plug is inserted correctly into the wall socket - Check that there is
  • EdgeStar KC3000TWIN | Owner's Manual - Page 16
    of the product. Damages or operating problems resulting from abuse, operation outside environmental specifications, uses contrary to instructions provided in the owner's manual, accidents, vermin, fire, flood, improper installation, unauthorized service, unauthorized installation or modification, or
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

1
SAFETY PRECAUTIONS
Read all of the instructions before using this appliance. When using
this appliance, always exercise basic safely precautions, including the
following:
This appliance is designed for household use only and not for commercial
use. Do not use the appliance for uses other than that for which it is
designed.
Do not use the appliance if the power supply cord is damaged. If the
power supply cord is damaged, it must be replaced by a qualified
technician.
This unit is designed to function on 115 Volts/ 60 Hz (110/115/120 Volts
acceptable) electrical circuits.
This appliance is not designed for children. Never allow unattended
children to use this appliance.
Unplug the appliance if it will not be used for an extended period of time.
Unplug the appliance prior to cleaning.
Set the appliance on a level surface away from direct sunlight and other
heat sources.
This appliance is designed to function optimally in room temperature
environments (mid 70°s Fahrenheit).
Do not move the unit while it is full.
The power supply cord must be grounded.
Never pull the power supply cord directly to disconnect the appliance.
Always pull the plug out of the socket.
Never lift the appliance by the power supply cord or the dispensing tap.
Keep the power supply cord away from heating surfaces.
Service only by authorized technicians.
Do not immerse the appliance or its power supply cord in water or any
other liquid.
Do not cover the appliance or place anything on it.
Do not insert any objects into the ventilation holes.
Only use approved CO
2
cylinders. Make sure you read and understand all
the procedures for the CO
2
cylinders before installation.
Cylinders contain pressurized CO
2
. Keep them away from heat, and store
in a dry and cool place. CO
2
cylinders should always be connected to a
regulator! Failure to do so may cause an explosion resulting in possible
death or injury when the cylinder valve is opened.
Do not dispose of empty CO
2
cylinders in a fire. Never drop or throw a CO
2
cylinder.
Clean this appliance regularly, and after every keg.
If you are replacing an older appliance with this unit, take care to remove
the door of the old appliance before throwing it away. This will alleviate the
risk of child entrapment.