E-Z-GO Terrain 1000 - Electric Owner Manual - Page 56

MAINTENANCE Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. LUBRICATION Do not use more than three (3) pumps of grease in any grease fitting at any one time. Excess grease may cause grease seals to fail or grease migration into areas that could damage components. Lubrication Points 5 Rack Ball Joint View from Underside of Vehicle Putting more than three pumps of grease in a grease fitting could damage grease seals and cause premature bearing failure. PDS SYSTEM TEST At monthly intervals, test the PDS system by allowing the vehicle to roll down an incline with the accelerator pedal released. Braking force should be felt at approximately 2 mph (3 kph) indicating that the PDS system is functioning. If vehicle speed continues to rise, apply the service brake and have vehicle inspected by a trained mechanic. Hardware BOLT SIZE Grade 2 Grade 5 Grade 8 BOLT SIZE Class 5.8 (Grade 2) 5.8 Class 8.8 (Grade 5) 8.8 Class 10.9 (Grade 8) 10.9 ALL TORQUE FIGURES ARE IN FT. LBS. (Nm) Unless otherwise noted in text, tighten all hardware in accordance with this chart. This chart specifies 'lubricated' torque figures. Fasteners that are plated or lubricated when installed are considered 'wet' and require approximately 80% of the torque required for 'dry' fasteners. 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" 1" 4 8 15 24 35 55 75 130 125 190 (5) (11) (20) (33) (47) (75) (102) (176) (169) (258) 6 13 23 35 55 80 110 200 320 480 (8) (18) (31) (47) (75) (108) (149) (271) (434) (651) 6 18 35 55 80 110 170 280 460 680 (8) (24) (47) (75) (108) (149) (230) (380) (624) (922) M4 M5 M6 M8 M10 M12 M14 1 2 4 10 20 35 55 (2) (3) (6) (14) (27) (47) (76.4) 2 4 7 18 35 61 97 (3) (6) (10) (24) (47) (83) (131) 3 6 10 25 49 86 136 (4) (8) (14) (34) (66) (117) (184) Torque Specifications and Bolt Grades 5 - 10