Denon AVR-2311 Owners Manual - English - Page 61
LPF for LFE
View all Denon AVR-2311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
ENGLISH Manual Setup Setting items Speaker Config. (Continued) Setting details Surround : Set the presence and size of the surround speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected. • When "Surround" is set to "Large", "S.Back" and "F.Height" can be set to "Large". • When "Surround" is set to "None", "S.Back" and "F.Height" can automatically set to "None". S.Back : Set the presence, size and number of surround back speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround back speakers are not connected. • 2spkrs : Use two surround back speakers. • 1spkr : Use only one surround back speaker. When you select this setting, connect the surround back speaker to the left (L) channel. Even when the "S.Back" setting is other than "None", sound may not be emitted from the surround back speaker, depending on the playback source. In this case, make "Surround Parameter" - "S.Back" setting other than "OFF" (vpage 53). NOTE When the "Amp Assign" setting (vpage 57) is other than "Normal", you cannot make the "S.Back" setting. F.Height : Set the presence and size of the front height speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the front height speakers are not connected. NOTE When the "Amp Assign" setting (vpage 57) is other than "Front Height", you cannot make the "F.Height" setting. Setting items Bass Setting Set subwoofer and LFE signal range playback. Setting details SW Mode : Select low range signals to be reproduced by subwoofer. • LFE : The low range signal of the channel set to "Small" speaker size is added to the LFE signal output from the subwoofer. • LFE+Main : The low range signal of all channels is added to the LFE signal output from the subwoofer. Distance Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. • "SW Mode" can be set when "Speaker Config." - "Subwoofer" (vpage 57) is set to "Yes". • Play music or a movie source and select the mode offering the strongest bass. • Select "LFE+Main" if you want the bass signals to always be produced from the subwoofer. NOTE If "Front" and "Center" for "Speaker Config." are set to "Large", and "SW Mode" is set to "LFE", no sound may be output from the subwoofers, depending on the input signal or selected surround mode. LPF for LFE : Set LFE signal playback range. • 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz Unit : Set the unit of distance. • Feet / Meters Step : Set the minimum variable width of the distance. • 1ft / 0.1ft • 0.1m / 0.01m Front L / Front R / Center / Subwoofer / Surround L / Surround R / S.Back Lz / S.Back Rz / F.Height L / F.Height R : Select the speaker. zz When the "Speaker Config." - "S.Back" setting (vpage 58) is set to "1spkr", "S.Back" is displayed. • 0.0ft - 60.0ft / 0.00m - 18.00m : Set the distance. • The speakers that can be selected differ depending on the "Amp Assign" (vpage 57) and "Speaker Config." (vpage 57) settings. • Default settings : Front L / Front R / Center / Subwoofer / F.Height L / F.Height R : 12.0 ft (3.6 m) Surround L / Surround R / S.Back L / S.Back R : 10.0 ft (3.0 m) • Set the difference in the distance between the speakers to less than 20 ft (6.0 m). NOTE Speakers set to "None" in "Speaker Config." (vpage 57) are not displayed. 58 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu