Denon ASD-1RWT Operating Instructions - Page 11

ENGLISH Functions and operation When the ASD-1R and a device equipped with a DOCK CONTROL terminal are connected • By connecting the ASD-1R and a DENON audio device equipped with a DOCK CONTROL terminal, it is possible to display the iPod's status on the connected audio device's on-screen display or regular display section and operate the iPod. • For instructions on operations, see the operating instructions of the connected audio device. NOTE: • On some devices it is possible to adjust the iPod's volume, but the volume output from the ASD-1R cannot be adjusted. • Be careful with the volume when adjusting the iPod's volume while listening through headphones. When the ASD-1R and a device equipped with a system control (SYSTEM CONNECTOR) terminal are connected • When the ASD-1R and a system device equipped with a system control (SYSTEM CONNECTOR) terminal are connected, the iPod can be operated with the cassette deck or CD recorder remote control buttons. • Operate according to the setting of the MODE SELECT switch on the ASD-1R's bottom panel. Remote control unit operating mode To operate the iPod in the cassette deck remote control mode To operate the iPod in the CD recorder remote control mode System device connection TAPE L R PB CD-R L R PB Communications mode selector (MODE SELECT) switch System remote control unit function Set to "TAPE". Set to "TAPE". Set to "CD-R". Set to "CD-R". Button names may differ from set to set. Check in the operating instructions of the set to be connected. NOTE: • Note that DENON will accept no responsibility whatsoever for loss of or damage to iPod data when using an iPod connected to the ASD-1R. 6 ENGLISH • Depending on the iPod's software version, it may not be possible to operate the iPod with the ASD-1R. Use the latest software version. Check the Apple Computer website for information on the latest software version.