Denon 2845CI Operating Instructions - Page 18
Denon 2845CI - DVD Changer Manual
UPC - 081757507592
View all Denon 2845CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
DISC PLAYBACK Basic Playback HDMI Setup DVD-V DVD-A VCD MP3 JPEG Getting started • • CD WMA Super Audio CD 1 Press the HDMI button on the front panel to select DivX ® the HDMI output mode. The output mode changes as follows every time the HDMI button is pressed. • The HDMI indicator on the front panel lights up when HDMI output mode is on. 480P 720P 1080 1080P OFF Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. Make sure the TV and audio receiver (commercially available) are set to the correct channel. 1 Press the POWER ON button. • "P-ON" will appear briefly on the display panel. 2 Press the OPEN/CLOSE button to open disc load- ing tray. 3 Press the DISC SKIP button repeatedly or press the DISC NUMBER button. • The desired disc tray moves to the front position. 4 Place the disc in the tray, 480P (Default): Video output from the HDMI OUT jack at 480p. 720P: Video output from the HDMI OUT jack at 720p. 1080: Video output from the HDMI OUT jack at 1080i. 1080P: Video output from the HDMI OUT jack at 1080p. OFF: No video output from the HDMI OUT connector. with the label facing up. • Repeat steps 3 and 4 to load more discs. Right side tray Left side tray NOTES: • Video and audio signals may distorted temporarily when switching to/from the HDMI output mode. • Use a display equipment with an HDMI-compatible port. • The HDMI indicator on the front panel flashes when you select the HDMI output mode but there is no HDMI cable. • You can check the HDMI connection status by pressing the DISPLAY button during playback with the HDMI output mode (refer to page 26). • If the TV is not compatible with newly selected HDMI output mode, the actual output mode will be kept the one before changing the selection. When this occurs, the newly selected mode will appear on the front panel display (see page 12) while the actual output resolution will be indicated by performing the on-screen display as described on page 27. 5 Press the PLAY button. • The tray will close automatically, and playback will start from the first chapter or track of the disc. If the playback does not start automatically, press the PLAY button. • If the disc has not been set on the left side tray, the DVD player will play the disc which is set on the right side tray. • When you want to select the other disc, press the DISC SKIP button repeatedly or the DISC NUMBER button for your desired disc. • When you playback the DVD with a title menu, it may appear on the screen. In this case, refer to "Title Menu". 6 Press the STOP button to stop playback. General Features DVD-V DVD-A DVD may contain menus to navigate the disc and access special features. Press the appropriate Numeric buttons or use the Cursor buttons (K / L / s / B) to highlight your selection in the DVD main menu and press the ENTER button to confirm. NOTES: • A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. • With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles. • During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. • During the playback of a DVD-RW which has been recorded in the VR mode, the sound or picture may freeze momentarily depended on disc content. • You can open the tray and change 2 discs during playback by pressing the DISC EXCHANGE button. • Disc position will be displayed on the TV screen when you press DISC NUMBER or DISC SKIP button. NOTE: • Unless otherwise stated, all operations described in this manual are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. Disc Menus DVD-V 1 Press the MENU button. • The DVD main menu will appear. 2 If the feature is not available, CANCELING AND CALLING BACK PBC FUNCTION VCD 1 Insert a Video CD. 2 Press the STOP button. 3 Press the Numeric buttons to enter the desired symbol may appear on the TV screen. 3 If disc menu is available on the disc, audio language, subtitle options, chapters for the title and other options will appear for selection. 4 Press the Cursor buttons (K / L/ s / B) to select an item, and the ENTER button to confirm the selection. Track number. • PBC function is now canceled and the playback of the Video CD will start. 4 To call back PBC function, press the STOP button twice, and then press the PLAY button. • The title menu will appear on the TV screen. - 18 - EN