Dell UZ2215H Dell Users Guide - Page 34
Using the Mobile-High Definition Link MHL, Bottom View, Using the On-Screen Display OSD Menu
View all Dell UZ2215H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Using the Mobile-High Definition Link (MHL) NOTE: This monitor is MHL certified. NOTE: To use the MHL function, use only MHL certified cable and source devices that support MHL output. NOTE: Some MHL source devices may take more than a few seconds or longer to output an image, depending on MHL source devices. NOTE: When the connected MHL source device enters Standby mode, the monitor displays a black screen or the message below, depending on MHL source device's output. To enable MHL connection, please perform the below steps: 1. Plug the power cable on your monitor into a AC outlet. 2. Connect the (micro) USB port on you MHL source device to HDMI (MHL) 1 or HDMI (MHL) 2 port on the monitor with a MHL certified cable. (See Bottom View for details) 3. Turn On the monitor and the MHL source device. 4. Select input source on monitor to HDMI (MHL) 1 or HDMI (MHL) 2 by using OSD Menu (See Using the On-Screen Display (OSD) Menu for details.) 5. If the monitor does not display an image, see Mobile High-Definition Link (MHL) Specific Problems. 34 | Setting Up the Monitor