Dell U3023E Monitor Teardown Instructions - Page 4
S18-4 Take out bulk cap. pin solder with soldering iron
 |
View all Dell U3023E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
4 DELL U3023E Remove electrolyte capacitors (red mark) from S18 printed circuit boards. S18-4 Take out bulk cap. pin solder with soldering iron and absorber. S18-1 Cut the glue between bulk cap. and PCB with a knife. S18-5 Lift the bulk cap. up and away from the PCB. S18-2 Ensure cutting path within the glue, don't touch bulk cap. or PCB. S18-3 Cut into the bottom of bulk cap. and pullit up carefully.
-
1 -
2 -
3 -
4 -
5
 |
 |
4
DELL U3023E
Remove electrolyte capacitors (red mark) from
printed circuit boards.
S18
S18-1 Cut the glue between bulk cap. and PCB with a knife.
S18-2 Ensure cutting path within the glue, don’t touch bulk
cap. or PCB.
S18-4 Take out bulk cap. pin solder with soldering iron and
absorber.
S18-5 Lift the bulk cap. up and away from the PCB.
S18-3 Cut into the bottom of bulk cap. and pullit up
carefully.