Dell Precision 3440 Small Form Factor Service Manual - Page 40
Coin-cell battery, Removing the coin-cell battery
![]() |
View all Dell Precision 3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Steps 1. Place the heat sink on the processor. 2. Tighten the four captive screws that secure the heat-sink to the system board, as per the callout on the system board. NOTE: Tighten the screws in a sequential order (1,2,3,4) as mentioned on the system board. 3. Connect the heat sink fan cable to the system board. Next steps 1. Install the front bezel. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Coin-cell battery Removing the coin-cell battery Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. About this task The following images indicate the location of the coin-cell battery and provide a visual representation of the removal procedure. 40 Disassembly and reassembly
![](/manual_guide/products/dell-precision-3440-small-form-factor-service-manual-355259b/40.png)