Dell PowerStore 1200T EMC PowerStore Host Configuration Guide - Page 55
Boot from SAN
View all Dell PowerStore 1200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Validation ● failback - "immediate" ● no_path_retry - "3" ● rr_min_io_rq - "1" ● fast_io_fail_tmo - "15" ● max_sectors_kb - "1024" NVMe Device Mapper Multipathing: Modify /etc/multipath.conf file as follows: ● vendor - ".*" ● product - "dellemc-powerstore" ● prio = ana ● uid_attribute = ID_WWN ● path_selector - "queue-length 0" ● path_grouping_policy - "group_by_prio" ● path_checker - "tur" ● detect_prio - "yes" ● failback - "immediate" ● no_path_retry - "3" ● rr_min_io_rq - "1" ● fast_io_fail_tmo - "15" iSCSI Configuration: When using PowerStore operating system 2.x (or later), configure two subnets. Impact Performance Stability iSCSI Configuration: Performance Modify /etc/iscsi/iscsid.conf file as follows: ● node.session.timeo.replacement_timeo ut = 15 ● node.startup = automatic iSCSI Configuration: Use _netdev or nofail option in /etc/ fstab Stability iSCSI Configuration: Use iSCSI interfaces Performance Temporarily disable UNMAP during file system creation. ● When creating a file system using the mke2fs command, use the "-E nodiscard" parameter. ● When creating a file system using the mkfs.xfs command, use the "-K" parameter. Performance Severity Refer to Section Recommended Configuration with Device Mapper Multipathing for SCSI Recommended Recommended PowerStore Operating System 2.x and Later Multi Subnet Updating iSCSI Configuration File Mandatory Recommended Recommended Mounting iSCSI File Systems iSCSI Session Configuration Creating a File System Boot from SAN For guidelines and recommendations for boot from SAN with Linux hosts and PowerStore, refer to the Considerations for Boot from SAN with PowerStore appendix. Host Configuration for Linux 55