Dell P3223DE Monitor Users Guide - Page 41
Connecting the Monitor for DPBS for the First Time, W to On in Off Mode.
View all Dell P3223DE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Connecting the Monitor for DPBS for the First Time USB-C Initial monitor power state(OFF) Initial system power state(OFF) USB-C For the first time setting up the DPBS function: 1. Make sure both the PC and monitor is OFF. 2. Press the monitor power button to turn ON the monitor. 3. Connect the USB-C cable from the PC to the monitor. 4. Both the monitor and PC will turn ON normally except Dell Optiplex 7090/3090 Ultra platform. 5. When you connect the Dell Optiplex 7090/3090 Ultra platform, you may see both the monitor and PC will turn ON momentarily. Wait for a while (approximately 6 seconds) and both the PC and monitor will turn OFF. When you press either the monitor power button or PC power button, both the PC and monitor will turn ON. The PC system power state is in sync with the monitor power button. NOTE: When the monitor and PC are both at power OFF state for the first time, it is recommended that you turn ON the monitor first, then connect the USB-C cable from the PC to the monitor. NOTE: You can power the Dell PC* Ultra platform using its DC adaptor jack. Alternatively, you can power the Dell PC* Ultra platform using the monitor's USB-C cable via Power Delivery (PD); please set USB-C Charging 90 W to On in Off Mode. * Ensure to check the Dell PC for DBPS supportability. Setting Up the Monitor | 41