Dell P3221D Users Guide - Page 54
OSD warning messages, When the monitor enters
View all Dell P3221D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
OSD warning messages When the monitor does not support a particular resolution mode, you can see the following message: The current input timing is not supported by the monitor display. Please change your input timing to 2560x1440, 60Hz or any other monitor listed timing as per the monitor speci cations. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Resolution specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 2560 x 1440. You can see the following message before the DDC/CI function is disabled: The function of adjusting display setting using PC application will be disabled. Do you wish to disable DDC/CI function? Yes No When the monitor enters the Standby mode, the following message will appear: Going into Standby Mode Activate the computer and wake up the monitor to gain access to the OSD. If you press any button other than the power button, the following messages will appear depending on the selected input: No USB-C signal from your device. Press any key on the keyboard to wake it up. If there is no display, press the monitor joystick to select correct input sources. 54 | Operating the monitor