Dell P2723QE Monitor Users Guide - Page 70

Troubleshooting, Self-test, WARNING: Before you begin any of the procedures in

Get Dell P2723QE PDF manuals and user guides View all Dell P2723QE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety instructions. Self-test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn Off both your computer and the monitor. 2. Unplug the video cable from the computer. 3. Turn On the monitor. The floating dialog box should appear on-screen (against a black background), if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains white. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen. No USB-C Cable The display will go into Standby mode in 4 minutes. www.dell.com/P2723QE or No DP Cable The display will go into Standby mode in 4 minutes. www.dell.com/P2723QE or No HDMI Cable The display will go into Standby mode in 4 minutes. www.dell.com/P2723QE 70 │ Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
70
│
Troubleshooting
Troubleshooting
WARNING: Before you begin any of the procedures in this section, follow the
Safety instructions
.
Self-test
Your monitor provides a self-test feature that allows you to check whether your monitor
is functioning properly. If your monitor and computer are properly connected but the
monitor screen remains dark, run the monitor self-test by performing the following steps:
1.
Turn Off both your computer and the monitor.
2.
Unplug the video cable from the computer.
3.
Turn On the monitor.
The floating dialog box should appear on-screen (against a black background), if the
monitor cannot sense a video signal and is working correctly. While in self-test mode, the
power LED remains white. Also, depending upon the selected input, one of the dialogs
shown below will continuously scroll through the screen.
No USB-C Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/P2723QE
or
No DP Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/P2723QE
or
No HDMI Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/P2723QE