Dell P2424HEB Video Conferencing Monitor Teardown Instructions - Page 5
S23-4 Take out bulk cap. pin solder with soldering iron
![]() |
View all Dell P2424HEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Remove electrolyte capacitors (red mark) from S23 printed circuit boards. DELL P2424HEB 5 S23-4 Take out bulk cap. pin solder with soldering iron and absorber. S23-1 Cut the glue between bulk cap. and PCB with a knife. S23-5 Lift the bulk cap. up and away from the PCB. S23-2 Ensure cutting path within the glue, don't touch bulk cap. or PCB. S23-3 Cut into the bottom of bulk cap. and pullit up carefully.
![](/manual_guide/products/dell-p2424heb-video-conferencing-monitor-teardown-instructions-612677c/5.png)
5
DELL P2424HEB
Remove electrolyte capacitors (red mark) from
printed circuit boards.
S23
S23-1 Cut the glue between bulk cap. and PCB with a knife.
S23-2 Ensure cutting path within the glue, don’t touch bulk
cap. or PCB.
S23-4 Take out bulk cap. pin solder with soldering iron and
absorber.
S23-5 Lift the bulk cap. up and away from the PCB.
S23-3 Cut into the bottom of bulk cap. and pullit up
carefully.