Dell P2422H Users Guide - Page 59
Operating your monitor, NOTE: The message may be slightly different according to the con
View all Dell P2422H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
When the monitor goes into power-save mode, the following message appears: Going into Standby mode... Activate the computer and wake up the monitor to gain access to the OSD. NOTE: The message may be slightly different according to the connected input signal. If either VGA, HDMI, or DisplayPort cable is not connected, a floating dialog box as shown below appears. The monitor will enter Standby Mode after 4 minutes if left at this state. No VGA Cable The display will go into Standby mode in 4 minutes. www.dell.com/P2X22H or No HDMI Cable The display will go into Standby mode in 4 minutes. www.dell.com/P2X22H or No DP Cable The display will go into Standby mode in 4 minutes. www.dell.com/P2X22H NOTE: The message may be slightly different according to the connected input signal. Operating your monitor │ 59