Dell OptiPlex 7080 Small Form Factor Service Manual - Page 62
Diagnostic LED behavior
![]() |
View all Dell OptiPlex 7080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Diagnostic LED behavior Table 8. Diagnostic LED behavior Blinking pattern Amber 1 2 White 2 1 2 2 2 3 2 4 2 5 2 6 3 1 3 2 3 3 3 4 3 5 3 6 Problem description Unrecoverable SPI Flash Failure CPU failure • • Suggested resolution Run the Intel CPU diagnostics tools. If problem persists, replace the system board. System board failure (included • BIOS corruption or ROM error) • Flash latest BIOS version If problem persists, replace the system board. No memory/RAM detected • Confirm that the memory module is installed properly. • If problem persists, replace the memory module. Memory/RAM failure • Reset the memory module. • If problem persists, replace the memory module. Invalid memory installed • Reset the memory module. • If problem persists, replace the memory module. System board / Chipset Error / • Clock failure / Gate A20 failure / Super I/O failure / • Keyboard controller failure CMOS battery failure • • Flash latest BIOS version If problem persists, replace the system board. Reset the CMOS battery connection. If problem persists, replace the RTS battery. PCI or Video card/chip failure Replace the system board. BIOS Recovery image not found • • Flash latest BIOS version If problem persists, replace the system board. BIOS Recovery image found but • invalid • Flash latest BIOS version If problem persists, replace the system board. Power rail failure • EC ran into power sequencing failure. • If problem persists, replace the system board. SBIOS Flash corruption • Flash corruption detected by SBIOS • If problem persists, replace the system board. 62 Troubleshooting
![](/manual_guide/products/dell-optiplex-7080-small-form-factor-service-manual-6599078/62.png)