Dell OptiPlex 7080 Meeting Space Solutions Setup Guide - Page 13

● Logitech Tap Controller NOTE: For more information on Zoom Rooms, see Zoom Rooms User Guide NOTE: For more information on Logitech solutions, see Logitech Solutions for Zoom Rooms NOTE: The Zoom Rooms system setup image for the Zoom Rooms look and feel shown in the following image may vary depending on the actual system environment that you will be working upon during meeting space setup. This setup is only to help you with the cable connections and how it looks in the real time environment. For large space setup, you can setup a maximum of three monitors. For more information on setting up more than one monitor see, How to setup more than one Monitor NOTE: The Zoom Rooms system setup image for the Zoom Rooms look and feel shown in the following image may vary depending on the actual system environment that you will be working upon during meeting space setup. This setup is only to help you with the cable connections and the look and feel differs in the real time environment. NOTE: To mount the Dell OptiPlex 7080 XE Micro Form Factor system on the wall you need to have a supporting wall mount bracket. About this task To setup the Zoom Rooms for large space, do the following: Steps 1. Connect the Logitech Tap, Logitech Rally Plus and Meeting Room system with the required cables 2. During setup connect a USB keyboard and mouse to the Meeting Room system. This can be disconnected once the setup is completed. NOTE: The USB-A cable is valid only for touch display for Zoom Rooms. However, in this release touch display is not supported. 3. Power on the Meeting Room system. You must reboot the system more than once as updates will get downloaded and installed. The system screen may be blank for few minutes. Do not shut down the computer during this process. Setup Zoom Rooms for Small/Medium/Large Meeting Spaces 13