Dell OptiPlex 7050 Tower Owners Manual - Page 44
System board, Removing system board
![]() |
View all Dell OptiPlex 7050 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
System board Removing system board Steps 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. cover b. bezel 3. Open the front panel door. 4. Remove the: a. heat sink assembly b. processor c. expansion card d. optional M.2 PCIe SSD e. SD card reader f. memory module g. VGA daughter board 5. Disconnect the optical drive and hard drive cables [1,2] from the connectors on the system board. 6. Disconnect the following cables from the system board: a. PSU [1] 44 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-7050-tower-owners-manual-02b8e07/44.png)
System board
Removing system board
Steps
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
cover
b.
bezel
3.
Open the
front panel door
.
4.
Remove the:
a.
heat sink assembly
b.
processor
c.
expansion card
d.
optional M.2 PCIe SSD
e.
SD card reader
f.
memory module
g.
VGA daughter board
5.
Disconnect the optical drive and hard drive cables [1,2] from the connectors on the system board.
6.
Disconnect the following cables from the system board:
a.
PSU [1]
44
Disassembly and reassembly