Dell Latitude 9510 Setup and specifications guide - Page 29

Table 23. System Configuration(continued) Option Touchscreen Unobtrusive Mode Fingerprint Reader Miscellaneous devices Description • 1 minute • 5 minutes • 15 minutes • Never This option controls whether the touchscreen is enabled or disabled. This option is enabled by default. When enabled, pressing Fn+F7 will turn off all light and sound emissions in the system. Press Fn+F7 to resume normal operation. Default is Disabled. Enable or disable the Fingerprint Reader or the Fingerprint Reader Device's Single Sign On capability. • Enable Fingerprint Reader Device: Enabled by Default • ENable Fingerprint Reader Single Sign On: Enabled by Default Allows you to enable or disable various on board devices. • Enable Camera-Default • Enable Secure Digital (SD) Card • Secure Digital (SD) Card Boot-Disabled • Secure Digital Card (SD) Read-Only Mode-Disabled Video screen options Table 24. Video Option LCD Brightness Dynamic Backlight Control Description Allows you to set the display brightness depending upon the power source. On Battery (50% is default) and On AC (100% default). This option enables or disables the Dynamic Backlight Control if the panel supports the feature. Security Table 25. Security Option Admin Password Description Allows you to set, change, or delete the administrator (admin) password. The entries to set the password are: • Enter the old password: • Enter the new password: • Confirm new password: Click OK once you set the password. NOTE: For the first time login, "Enter the old password:" field is marked to "Not set". Set the password for the first time and later you can change or delete the password. System setup 29