Dell Latitude 7400 2-in-1 Service Manual - Page 62

Display assembly, Removing the display assembly

Get Dell Latitude 7400 2-in-1 PDF manuals and user guides View all Dell Latitude 7400 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Next steps 1. Connect the battery cable 2. Install the base cover. 3. Install the SD memory card. 4. Follow the procedure in after working inside your computer. Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the SD memory card. 3. Remove the base cover. 4. Disconnect the battery cable. Steps 1. Partially peel off the Mylar sheet [1] from the system board. 2. Disconnect the camera and touch screen FPC cable [2] from the connector on the system board. 3. Peel off the camera and touch screen FPC cable from the heatsink shield [3]. 62 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Next steps
1.
Connect the
battery cable
2.
Install the
base cover
.
3.
Install the
SD memory card
.
4.
Follow the procedure in
after working inside your computer
.
Display assembly
Removing the display assembly
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
SD memory card
.
3.
Remove the
base cover
.
4.
Disconnect the
battery cable
.
Steps
1.
Partially peel off the Mylar sheet [1] from the system board.
2.
Disconnect the camera and touch screen FPC cable [2] from the connector on the system board.
3.
Peel off the camera and touch screen FPC cable from the heatsink shield [3].
62
Removing and installing components