Dell Inspiron 15 5510 Inspiron 15 5518 Service Manual - Page 35

Coin-cell battery, Removing the coin-cell battery

Get Dell Inspiron 15 5510 PDF manuals and user guides View all Dell Inspiron 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

About this task The following image indicates the location of the fan and provides a visual representation of the installation procedure. Steps 1. Using the alignment posts, place the fan on the palm-rest and keyboard assembly. 2. Replace the two (M2x3) screws to secure the fan to the palm-rest and keyboard assembly. 3. Connect the fan cable to the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Coin-cell battery Removing the coin-cell battery Prerequisites 1. Follow the procedure in Before working inside your computer. CAUTION: Removing the coin-cell battery resets the BIOS setup program's settings to default. It is recommended that you note the BIOS setup program's settings before removing the coin-cell battery. 2. Enter Service Mode. 3. Remove the base cover. Removing and installing components 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
About this task
The following image indicates the location of the fan and provides a visual representation of the installation procedure.
Steps
1.
Using the alignment posts, place the fan on the palm-rest and keyboard assembly.
2.
Replace the two (M2x3) screws to secure the fan to the palm-rest and keyboard assembly.
3.
Connect the fan cable to the system board.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
CAUTION:
Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is
recommended that you note the BIOS setup program’s settings before removing the coin-cell battery.
2.
Enter
Service Mode
.
3.
Remove the
base cover
.
Removing and installing components
35