Dell C9010 Modular Chassis Switch Networking Command-Line Reference Guide for - Page 84

Related Commands ftp-server enable - enables FTP server functions on the switch. ftp-server username - sets a username and password for incoming FTP connections. ftp-server username Create a user name and associated password for incoming FTP server sessions. C9000 Series Syntax ftp-server username username password [encryption-type] password To delete a user name and its password, use the no ftp-server username username command. Parameters username Enter a text string up to 40 characters long as the user name. password password Enter the keyword password then a string up to 40 characters long as the password. Without specifying an encryption type, the password is unencrypted. encryption-type (OPTIONAL) After the keyword password, enter one of the following numbers: • 0 (zero) for an unecrypted (clear text) password • 7 (seven) for a hidden text password Defaults Command Modes Command History Not enabled. CONFIGURATION This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. 84 Control and Monitoring