Dell C7017T Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 11

Installation Instructions 1. Hang screen onto the top rail of the mount (CC). (See Figure 9) • MSA1U / LSA1U: Hang top hook of interface brackets (V and W) onto the top rail of the mount (Z). (See Figure 9) • MTA1U / LTA1U: Move latch on top of interface bracket to OPEN position and hang top hook of interface brackets (X and Y) onto the top rail of the mount (Z). (See Figure 9) NOTE: The screen initially installs into the "service mode" to allow easy cable access. 2. Adjust screen and rails to desired viewing position. 3. Route cables between wall and rails. CAUTION: PINCH POINTS! Keep fingers, hands and cables out of pinch point areas. 4. Pull downward on the pull cords and swing inward toward wall, latching interface brackets to lower rail and fastening bottom of screen to the mount. (See Figure 9) 5. Attach end of pull cord (a magnet) to mount so it does not extend beyond bottom of screen. (See Figure 9) MSA1U / LSA1U 1 Top Hook MSA1U/MTA1U/LSA1U/LTA1U 1 Latch in OPEN position MTA1U / LTA1U 5 Pull cords 4 4 4 5 Pull cords 4 Figure 9 11