Dell Brocade 5100 Brocade Fabric OS v7.2.1e Release Notes v1.0 - Page 53
Fabric OS v7.2.1e Release Notes v1.0, of 82
View all Dell Brocade 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Closed with Code Change in Fabric OS v7.2.1b Defect ID: DEFECT000490754 Technical Severity: High Probability: Medium Product: FOS Technology: Traffic Management Reported In Release: FOS7.0.2 Technology Area: BB Credits Symptom: Switch ports connected to storage controller become unresponsive. Condition: This rare condition may occur with Fabric Loop (FL) port after many resets. The port may get into "Port failed due to busy buffer stuck error" state. Recovery: Reboot switch to recover; portdisable/port enable does not recover. Defect ID: DEFECT000491049 Technical Severity: Medium Product: FOS Technology: Distance Reported In Release: FOS7.2.0 Technology Area: Extended Fabrics Symptom: When WAN-side-failover-cable-pulls are performed with ISL-Inflight-Encryption "on", OLS counters are incremented. Condition: When ISL-Inflight-Encryption is turned "on" and the WAN cable is pulled, there is a possibility of frames getting dropped, which may result in credits not being returned, leading to a Link Reset. Defect ID: DEFECT000491841 Technical Severity: Medium Probability: Medium Product: FOS Technology: Traffic Management Reported In Release: FOS7.1.0 Technology Area: Lossless DLS Symptom: When F-port trunking is enabled, portdecom on the E-port may fail with "invalid remote port type" Condition: This portdecom failure on the E-port may be encountered when F-port trunking is enabled. Workaround: Disable F-port trunking, then portdecom will work. Defect ID: DEFECT000492224 Technical Severity: High Probability: Low Product: FOS Technology: Other Reported In Release: FOS7.1.0 Technology Area: Other Symptom: Data path lost after recovery of faulty slots or hafailover: Zone type is not set for some devices. Condition: This is a rare race condition that may cause inconsistency between zoning software and ASIC hardware state during zone CAM programming. Recovery: Ports must be bounced to recovery from the inconsistent port software/hardware zone type state, . Defect ID: DEFECT000492704 Technical Severity: High Probability: High Product: FOS Technology: Traffic Management Reported In Release: FOS6.4.3 Technology Area: FC-FC routing Symptom: "CRC error with good EOF" errors detected and may cause credit loss. Condition: This may be seen on DCX-4S: 1. With FC8-64 blades installed in - Slot 7 ports 155, 76 or - Slot 2 port 154. 2. Core blade 3/19,3/26, 6/70 Recovery: Auto Tuning/Manual Tuning Fabric OS v7.2.1e Release Notes v1.0 Page 53 of 82