Dacor MORS130S Use and Care Guide - Page 11

Racks

Get Dacor MORS130S PDF manuals and user guides View all Dacor MORS130S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Racks You may use either rack type on any level inside the oven. To insert the standard oven racks... 1. Insert the end of the rack with the safety notches into the oven first. 2. Attach both sides of the rack to the rack supports in the oven as shown in the diagram below. 3. Begin to slide the rack in, and then, lift up so that the safety notches clear the ends of the rack supports. 4. Push the rack all the way in with both hands. To remove the standard oven racks... If you want to remove an oven rack, grasp it with both hands and pull gently straight out toward you until it stops. To remove the rack completely, lift the front of the rack up about six inches and continue to pull it out. Lifting the rack releases the safety notches. The safety notches reduce the chances of a rack coming out of the oven accidentally. To insert your GlideRack oven rack... Your oven comes with a Dacor GlideRack oven rack. You can pull the GlideRack oven rack out further than the standard racks and still support heavy pots and pans full of food. It is great for heavier foods and the optional Dacor baking stone. 1. Hold the GlideRack oven rack with the guides fully extended away from you (see the diagram below). 2. Align both sets of safety clips (right and left) on the back of the guides with the oven rack supports as shown. 3. Begin to slide the rack in, lifting the front safety clips over the front of the oven rack supports. 4. Push the rack all the way to the back. 5. Grasp the rack in the center of the front and pull. The rack should come forward while the guides remain in place. To remove your GlideRack oven rack... • Grasp it with both hands and pull gently straight out toward you until it stops. • To remove the rack completely, lift the front of the rack up about six inches and continue to pull it out. Lifting the rack releases the safety clips. The safety clips reduce the chances of it coming out of the oven accidentally. Back of rack / Guides / Front of rack Standard Rack Rack support Front of rack Oven Rack GlideRack Back of _ guide Safety notch Slide oven rack supports into slots on the rack g Oven rack support Slide oven rack supports between back safety clips

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Racks
You may use either
rack type
on
any level inside the
oven.
To insert the standard
oven racks...
1.
Insert the end of the rack with the safety
notches into
the oven first.
2.
Attach
both sides of the rack to the rack supports
in
the oven as shown
in the diagram
below.
3.
Begin to slide the rack in, and then,
lift up so that the
safety notches clear the ends of the rack supports.
4.
Push the rack all the way in with both hands.
To remove the standard
oven racks...
If you want to remove an oven rack, grasp it with
both hands and pull gently
straight
out toward
you
until
it stops.
To remove the rack completely,
lift the front
of the
rack up about six inches and continue
to pull it out.
Lifting the rack releases the safety
notches. The
safety notches
reduce the chances of a rack coming
out of the oven accidentally.
To insert your GlideRack oven rack...
Your oven comes with a Dacor GlideRack oven rack. You
can pull the GlideRack oven rack out further
than the
standard
racks and still support
heavy pots and pans
full
of food.
It is great for heavier foods and the optional
Dacor baking
stone.
1.
Hold the GlideRack oven rack with the guides fully
extended
away from you (see the diagram
below).
2.
Align
both sets of safety
clips (right
and left)
on the
back of the guides with the oven rack supports
as
shown.
3.
Begin to slide the rack in, lifting
the front
safety
clips
over the front
of the oven rack supports.
4.
Push the rack all the way to the back.
5.
Grasp the rack in the center
of the front
and pull. The
rack should come forward
while the guides remain
in
place.
To remove your
GlideRack
oven
rack...
•
Grasp it with
both hands and pull gently
straight
out
toward
you until
it stops.
•
To remove
the rack completely,
lift the front
of the
rack up about six inches and continue
to pull it out.
Lifting
the rack releases the safety
clips. The safety
clips reduce the chances of it coming
out of the oven
accidentally.
Back of rack
/
Guides
/
Front of rack
Standard
Rack
Rack
support
Safety
Slide oven rack
notch
supports
into slots
on the rack
Front of
rack
Back of
GlideRack
_
guide
Oven
Rack
Oven rack
support
Slide oven rack supports
between
back safety clips
g