Dacor DR30EIF Installation Instructions - Page 8

Installation Specifications Self-Rimming Installation Cutout Options (Models DR30EIS and DR30EIFS Only) Countertop height: 34 3/4" (88.3 cm) min. • 36 7/8" (93.7 cm) max. Countertop thickness: 1 5/8" (4.1 cm) max. • On self-rimming installations when sliding the range into position, it will stop when the rear of the control panel or side panels contact the notches toward the front of the countertop. The self-rimming installation of the DR30EI[F]S range creates a "built-in" look where the range trim overlaps the countertop on both sides and the back. 10" min. (25.4 cm) to any combustibles above counter both sides Rear wall or countertop edge 3/8" min. (9.5 mm) countertop overhang 24 1/2" (62.2 cm) max. Countertop front 29 1/4" (74.3 cm) countertop opening 30 1/16" (76.2 cm) cabinet opening below countertop Notch countertop to width of cabinets Cabinet face below countertop 19 7/8" 19 7/8" (50.5 cm) (50.5 cm) to 22 7/8" (58.1 cm) Top View - Slide-In, Self-Rimming Installation, 3" Side Panels Installed 10" min. (25.4 cm) to any combustibles above counter both sides Rear wall or countertop edge 3/8" min. (9.5 mm) countertop overhang 24 1/2" (62.2 cm) max. Countertop front 29 1/4" (74.3 cm) countertop opening 30 1/16" (76.2 cm)* cabinet opening below countertop Notch countertop to width of cabinets Cabinet face below countertop 22 7/8" (58.1 cm) Top View - Slide-In, Self-Rimming Installation, 3" Side Panels Removed * To create a "built-in look" on the front of the cabinet, this dimension may be changed to 29 1/4" (74.3 cm), with the width at the notches remaining 30 1/16". This configuration is only for models DR30EIS and DR30EIFS with side panels behind door removed. 6