DELPHI SA10162 Installation Guide - Page 6
SKYFi2 Installation
View all DELPHI SA10162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
6 SKYFi2 Installation Because every vehicle is different, these instructions are provided as a general guideline only. If you need help, consult a professional installer. 1. Decide which method (cassette adaptor, wireless FM modulator, or direct connect) is most appropriate for your vehicle and where you live. 2. Verify the system is working by completing a test. Before installing the system, connect the XM Antenna, 12V power adaptor, and audio connector or cassette adaptor (if used) to the SKYFi2 Vehicle Adaptor cradle with the SKYFi2 Receiver inserted. Plug the 12V power adaptor into the cigarette lighter and place the XM Antenna on the roof of your vehicle. Make sure you are outdoors and not surrounded by tall buildings or trees. Turn on both your vehicle's radio and SKYFi2 Receiver. Tune the SKYFi2 Receiver to XM channel 1. You should be able to hear the XM Preview channel. If not, check all connections. Note: If using the wireless FM modulator or the Delphi FM Direct Adaptor, set the SKYFi2 Receiver and the FM radio to the same frequency. See the SKYFi2 User Guide section on "Listening to XM Using Any FM Radio." Warning: Do not install the mount where it or SKYFi2 could block your vision or usage of controls, or interfere with any safety devices such as airbags. Failure to correctly place SKYFi2 could result in injury to you or others if the unit becomes detached during an accident and/or obstructs the deployment of an airbag.