D-Link M32-2 Product Manual - Page 49
IPv6 - Auto Configuration SLAAC/DHCPv6, IPv6 DNS Settings, LAN IPv6 Address Settings
![]() |
View all D-Link M32-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Section 3 - Configuration IPv6 - Auto Configuration (SLAAC/DHCPv6) Select Auto Configuration (SLAAC/DHCPv6) if your ISP assigns your IPv6 address when your router requests one from the ISP's server. Some ISPs require you to adjust these settings before your router can connect to the IPv6 Internet. Click Save when you are done. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. Primary DNS Server: If you select Use the following DNS address, enter the primary DNS server address Secondary DNS If you select Use the following DNS address, enter the Server: secondary DNS server address. LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. LAN IPv6 Link-Local Displays the router's LAN link-local address. Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link-Local Displays the router's LAN link-local address. Address: D-Link M32 User Manual 45
![](/manual_guide/products/dlink-m322-product-manual-8683c6f/49.png)