D-Link G415 Product Manual - Page 64

DHCP Server, Status, DHCP IP Address, Range, DHCP Lease Time, Always Broadcast, WAN Port Speed

Get D-Link G415 PDF manuals and user guides View all D-Link G415 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Section 3 - Configuration Status DHCP IP Address Range DHCP Lease Time Always Broadcast WAN Port Speed UPnP IPv4 Multicast Streams IPv6 Multicast Streams DHCP Server Enable or disable the DHCP server. Enter the start and end IP addresses for the DHCP server's IP assignment. Note: If you statically assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. Enter the length of time for the IP address lease in minutes. The default is 10080 minutes. Enable this feature to broadcast your network's DHCP server to LAN/WLAN clients. Advanced Settings... You may set the link speed of the Internet port to 10 Mbps, 100 Mbps, 1000 Mbps, or Auto (recommended). Enable or disable Universal Plug and Play (UPnP). UPnP provides compatibility with networking equipment, software, and peripherals. This is enabled by default. Allow or disallow IPv4 multicast traffic to pass through the router from the Internet. This is enabled by default. Allow or disallow IPv6 multicast traffic to pass through the router from the Internet. This is enabled by default. D-Link G415 User Manual 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
59
D-Link
G415 User Manual
Section 3 - Configuration
DHCP Server
Status
Enable or disable the DHCP server.
DHCP IP Address
Range
Enter the start and end IP addresses for the DHCP server's IP
assignment.
Note
:
If you statically assign IP addresses to your
computers or devices, make sure the IP addresses are outside of
this range or you may have an IP conflict.
DHCP Lease Time
Enter the length of time for the IP address lease in minutes.
The default is 10080 minutes.
Always Broadcast
Enable this feature to broadcast your network's DHCP server
to LAN/WLAN clients.
Advanced Settings...
WAN Port Speed
You may set the link speed of the Internet port to
10 Mbps,
100 Mbps, 1000 Mbps
, or
Auto
(recommended).
UPnP
Enable or disable Universal Plug and Play (UPnP). UPnP
provides compatibility with networking equipment, software,
and peripherals. This is enabled by default.
IPv4 Multicast Streams
Allow or disallow IPv4 multicast traffic to pass through the
router from the Internet. This is enabled by default.
IPv6 Multicast Streams
Allow or disallow IPv6 multicast traffic to pass through the
router from the Internet. This is enabled by default.