D-Link DWL-X8630AP Qiuck Install Guide 3 - Page 2

ENGLISH About This Guide This installation guide provides basic instructions for installing the DWL-X8630AP on your network. For additional information about how to use the access point, please see the User Manual, which is available on the D-Link support website. Optional Accessories - PoE Injector (Model: DPE-311GI) Note: These accessories are not included and can be purchased separately. Please contact your local D-Link reseller. Hardware Overview System Requirements - Windows®, Macintosh®, or Linux-based operating system - An available Ethernet port - Internet Explorer 11, Safari 7, Firefox 28, Google Chrome 33 or higher LED Indicators Package Contents This DWL-X8630AP should include the following items: - DWL-X8630AP - Mounting ring - Console cable (optional)* - Ceiling bracket (3 sets: 9/16", 14/16", and 1 1/2") If any item is missing or damaged, please contact your local D-Link reseller. Note: The power adapter is optional and is not included. To power the unit, use a D-Link PoE switch or the D-Link DPE-311GI PoE Injector. *If this item is not included, it can be purchased separately. Please contact your local D-Link reseller. Figure 1. DWL-X8630AP LEDs POWER When this LED is red, the access point is booting up. When it is green, it is ready for use. LAN1/LAN2 When this LED is lit, the device's Ethernet port is connected to an active router or switch. The light will flash when data is being transmitted through the port. 2.4GHz/5GHz When this LED is lit, the access point's wireless radio is enabled. It will flash when data is being transmitted via wireless. 2  D-Link DWL-X8630AP Quick Install Guide