D-Link DWL-8620AP Quick Installation Guide - Page 4

ENGLISH • Connecting through a Unified Wireless Warning: This product is to be connected only to Switch or Wireless Controller: Connect PoE networks without routing to the outside plant. the access point to a Unified Wireless The equipment power cord must be connected to Switch or Wireless Controller. Connect a socket-outlet earthling connection. your computer to the same network as that of the Unified Wireless Switch or Avertissement: Le DWL-8620AP est concu Wireless Controller. Log in to the Unified pour recevoir de l'alimentation PoE uniquement Wireless Switch's or Wireless Controller's a partir d'une source compatible 802.3at ou d'un web administration page. For the default adaptateur secteur approuve par D-Link. La login information please refer to the connexion d'un point d'acces a un peripherique Unified Wireless Switch or Wireless Power over Ethernet (PoE) non approuve par Controller user manual. D-Link peut endommager l'equipement. DWL-8620AP Unified Wireless Switch or Wireless Controller Computer Mounting Options You can mount the DWL-8620AP access point on any of the following types of surfaces: • Solid surface wall or ceiling • Tabletop Cable Requirement Use a CAT 5 cable with an even sheath. The Ethernet ports on the DWL-8620AP access point cannot accept a CAT 5 cable that has an uneven sheath; the RJ-45 connector on the cable will not fit properly into the receptacle on the access point. Avertissement: Ce produit doit etre connecte uniquement aux reseaux PoE sans acheminement vers l'installation externe. Le cordon d'alimentation de l'equipement doit etre branche sur une prise de terre avec prise de courant. Mounting Using Anchor Screws Installation 1. Use the plastic wall mounting ring to mark the points where you will insert the screws on a wall or ceiling. 2. Drill holes in the marked points and insert the plastic wall anchors. 3. Use the supplied screws to attach the mounting ring to the wall. Wall Installation Recommendations If you plan to install the DWL-8620AP on a wall or other vertical surfaces, orient the top of the access point (the side with the LEDs) toward the intended coverage area. The radio antennas transmit through the top of the access point but not through the bottom (where the bracket is). Warning: The DWL-8620AP is designed to receive PoE power only from an 802.3atcompliant source or from a D-Link-approved power adapter. Connecting an access point to a Power over Ethernet (PoE) device that is not approved by D-Link can damage the equipment. 4. Plug the CAT 5 cable into the LAN port on the access point. 4  D-Link DWL-8620AP Quick Install Guide