D-Link DIS-300G-8PSW CLI Manual - Page 69
SNMP Con Command
View all D-Link DIS-300G-8PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
receiver list packet byte 3.8.5 sflow max-sampling-size Description Specifies the maximum number of bytes to transmit per flow sample. Syntax sflow max-sampling-size [ sampler ] [ ] Parameter Name Description < range_list > Sampler instance packet byte 3.8.6 sflow collector-port Description Collector UDP port Syntax sflow collector-port [ receiver ] Parameter Name Description collector_port Port number 3.8.7 sflow sampling-rate Description Specifies the statistical sampling rate. The sample rate is specified as N to sample 1/Nth of the packets n the monitored flows. There are no restrictions on the value, but the switch will adjust it to the closest possible sampling rate. Syntax sflow sampling-rate [ sampler ] [ ] Parameter Name Description < range_list > Sampler instance Sampling rate 3.8.8 sflow timeout Description Receiver timeout measured in seconds. The switch decrements the timeout once per second, and as long as it is non-zero, the receiver receives samples. Once the timeout reaches 0, the receiver and all its configuration is reset to defaults. Syntax sflow timeout [ receiver ] Parameter Name Description < range_list > Sampler instance Number of seconds. 3.9 SNMP Configure Command 3.9.1 snmp-server Description Enable SNMP server Syntax snmp-server Parameter Name Description 3.9.2 snmp-server access Description snmp-server access configuration Syntax snmp-server access < group name > model { v1 | v2c | v3 | any } level { auth | noauth | priv } [ read ] [ write ] Parameter 57