D-Link DIR-X1870 User Manual - Page 37
Auto Configuration SLAAC/DHCPv6 Continued
View all D-Link DIR-X1870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Section 3 - Configuration Auto Configuration (SLAAC/DHCPv6) (Continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature. IPv6 Address Enabling this feature presents additional configuration options. Assignment: Enable Automatic Enable or disable DHCP-PD for other IPv6 routers connected to the DHCP-PD in LAN: LAN interface. This option is only available if Enable DHCP-PD is enabled. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. Autoconfiguration Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. Type: If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type: Router Enter the router advertisement lifetime (in minutes). Advertisement Lifetime: If you selected Stateful DHCPv6 as the Autoconfiguration Type: IPv6 Address Enter the starting IPv6 address for the DHCP server's IPv6 assignment. Range (Start): IPv6 Address Enter the ending IPv6 address for the DHCP server's IPv6 assignment. Range (End): IPv6 Address If Enable DHCP-PD is disabled, enter the IPv6 address lifetime (in Lifetime: minutes). Click Save when you are done. D-Link DIR-X1870 33