D-Link DIR-652 User Manual - Page 26

Wireless Settings

Get D-Link DIR-652 PDF manuals and user guides View all D-Link DIR-652 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Section 3 - Configuration Wireless Settings Enable Wireless: Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. Schedule: The schedule of time when the wireless settings rules will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Wireless Service Set Identifier (SSID) is the name of your wireless network. Create Network Name: a name using up to 32 characters. The SSID is case-sensitive. Enable Auto The setting can be selected to allow the DIR-652 to choose the channel Channel Scan: with the least amount of interference. Wireless Indicates the channel setting for the DIR-652. By default the channel is Channel: set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be greyed out. 802.11 Mode: Select one of the following: 802.11g Only - Select if all of your wireless clients are 802.11g. 802.11n Only - Select only if all of your wireless clients are 802.11n. Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n and 11g wireless clients. Channel Width: Select the Channel Width: Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices. 20MHz - Select if you are not using any 802.11n wireless clients. 40MHz - Select if using only 802.11n wireless clients. Transmission Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance. Rate: Visibility Status: Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-652. If Invisible is selected, the SSID of the DIR-652 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-652 D-Link DIR-652 User Manual 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
21
D-Link DIR-652 User Manual
Section 3 - Configuration
Check the box to enable the wireless function. If you do not want to use
wireless, uncheck the box to disable all the wireless functions.
The schedule of time when the wireless settings rules will be enabled.
The schedule may be set to
Always
, which will allow the particular service
to always be enabled. You can create your own times in the
Tools
>
Schedules
section.
Service Set Identifier (SSID) is the name of your wireless network. Create
a name using up to 32 characters. The SSID is case-sensitive.
The
setting can be selected to allow the DIR-652 to choose the channel
with the least amount of interference.
Indicates the channel setting for the DIR-652. By default the channel is
set to 6. The Channel can be changed to fit the channel setting for an
existing wireless network or to customize the wireless network. If you
enable
Auto Channel Scan
, this option will be greyed out.
Select one of the following:
802.11g Only
- Select if all of your wireless clients are 802.11g.
802.11n Only
- Select only if all of your wireless clients are 802.11n.
Mixed 802.11n and 802.11g
- Select if you are using a mix of 802.11n and 11g wireless clients.
Select the Channel Width:
Auto 20/40
- This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz
- Select if you are not using any 802.11n wireless clients.
40MHz
- Select if using only 802.11n wireless clients.
Select the transmit rate. It is strongly suggested to select
Best (Auto)
for best performance.
Select
Invisible
if you do not want the SSID of your wireless network to be broadcasted by the DIR-652. If Invisible is
selected, the SSID of the DIR-652 will not be seen by Site Survey utilities so your wireless clients will have to know the
SSID of your DIR-652
Enable Wireless:
Schedule:
Wireless
Network Name:
Enable Auto
Channel Scan:
Wireless
Channel:
802.11 Mode:
Channel Width:
Transmission
Rate:
Visibility Status:
Wireless Settings