D-Link DGS-3100-24 Product Manual - Page 57
Field, Description, Time Source, Current Time, SNTP First Server, SNTP Second Server, SNTP Poll
UPC - 790069305122
View all D-Link DGS-3100-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
DGS-3100 Series Gigabit Stackable Managed Switch User Manual Polling for Time Information SNTP is used to poll time information from SNTP server. Using SNTP enables accurate system clock. The Time Settings Page allows network managers to enable and configure the SNTP time settings on the device. To enable SNTP: 1. Click Configuration > SNTP Settings > Time Settings. The Time Settings Page opens: Figure 0-10. Time Settings Page The Time Settings Page contains the following fields: Status Field Time Source Description Defines the time source by which the system time is set. The possible field values are: SNTP - Indicates that the system time is retrieved from a SNTP server. System Clock - Indicates that the system time is set locally by the device. Current Time Displays the current date and time. SNTP Settings Section Field SNTP First Server Description Defines the IP address of primary SNTP server from which the system time is retrieved. SNTP Second Server Defines the IP address of secondary SNTP server from which the system time is retrieved. SNTP Poll Interval in Seconds Defines the interval (in seconds) at which the SNTP server is polled for Unicast information. The range is 60-86400 seconds. The Poll Interval default is 1024 seconds. Set Current Time Field Time Setting Description Defines the current system date. The field format is Day/Month/Year. Time in HH MM SS Defines the current system time. The field format is HH:MM:SS based on the 24-hour clock (Military Time) For example, 9:00PM is configured as 21:00:00. 41