D-Link DGS-1210-16 Product Manual - Page 39
Configuration > Voice VLAN > Voice VLAN Setting, Configuration > 802.1Q Management VLAN
UPC - 790069332210
View all D-Link DGS-1210-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
5 Configuration D-Link Web Smart Switch User Manual After configuration, the user will be able to share the network resources set on the shared group of ports (nominated as PVID 1), with both smaller subsets of VLANs (nominated PVID 2, 3 and 4). However, VLAN 2, 3 and 4 groups are incapable of sharing information with each other directly. Click Example to see the example to configure asymmetric VLAN in larger networks. Note: When Asymmetric VLAN is enabled, IGMP Snooping, Management VLAN, and MAC address table will be reset to default. Configuration > 802.1Q Management VLAN The 802.1Q Management VLAN setting allows you to transfer the authority of the switch from the default VLAN to others created by users. This allows managing the whole network more flexible. By default, the Management VLAN is disabled. You can select any existing VLAN as the management VLAN when this function is enabled. There can only be one management VLAN at a time. Figure 60 - Configuration > 802.1Q Management VLAN Configuration > Voice VLAN > Voice VLAN Setting Voice VLAN is a feature that allows you to automatically place the voice traffic from IP phone to an assigned VLAN to enhance the VoIP service. With a higher priority and individual VLAN, the quality and the security of VoIP traffic are guaranteed. The Voice VLAN function will only insert the Voice VLAN tag to untagged packets under corresponding ports. If a VoIP packet comes with a VLAN tag, the Voice VLAN function won't replace the original VLAN tag. Figure 61 - Configuration > Voice VLAN > Voice VLAN Setting Voice VLAN State: Select to enable or disable Voice VLAN. The default is Disabled. After you enabled Voice VLAN, you can configure the Voice VLAN Global Settings. VLAN ID: The ID of VLAN that you want to assign voice traffic to. You must first create a VLAN from the 802.1Q VLAN page before you can assign a dedicated Voice VLAN. The member port you configured in 802.1Q VLAN setting page will be the static member port of voice VLAN. To dynamically add ports into the voice VLAN, please enable the Auto Detection function Priority: The 802.1p priority levels of the traffic in the Voice VLAN. 35