D-Link DGS-1100-08P Getting Started Guide - Page 4

The web configuration can also be accessed through the SmartConsole Utility. Open the SmartConsole Utility and double-click the switch as it appears in the Device List. This will automatically load the web configuration in your web browser. NOTE: The switch's factory default IP address is 10.90.90.90 with a subnet mask of 255.0.0.0 and a default gateway of 0.0.0.0 Step 3 When the following logon box appears, enter "admin" for the password. Press OK to enter the main configuration window. 5. Just connect the EasySmart Switch to the same L2 network segment of your PC and use the SmartConsole Utility to discover the EasySmart Switches. Option 2: Follow these steps to install the SmartConsole Utility manually. 1. Insert the Utility CD into your CD-Rom Drive. 2. From the Start menu on the Windows desktop, choose Run. 3. In the Run dialog box, type G:\SmartConsole Utility\ D-link_SmartConsole_Utility.exe (where G:\ represents the drive letter of your CD-Rom) and click OK. 4. Follow the on-screen instructions to install the utility. 5. Upon completion, go to Start > Programs > D-Link SmartConsole Utility and open the SmartConsole Utility. 6. Just connect the EasySmart Switch to the same L2 network segment of your PC and use the SmartConsole Utility to discover the EasySmart Switches. For a detailed look at SmartConsole's functions, please refer to the SmartConsole Utility introduction in the user manual. Figure 8. User authentication window SmartConsole Utility The SmartConsole Utility included on the installation CD is a program for discovering EasySmart Switches with the same L2 network segment connected to your PC. This tool is only for computers running Windows 2000, Windows XP, and Windows Vista x64/86 operating systems. There are two options for the installation of SmartConsole Utility, one is through the autorun program on the installation CD and the other is manual installation. Note: Please be sure to remove any existing SmartConsole Utility from your PC before installing the latest SmartConsole Utility. Option 1: Follow these steps to install the SmartConsole Utility via the autorun program on the installation CD. 1. Insert the Utility CD into your CD-Rom Drive. 2. The autorun program will pop up automatically 3. Simply click on the "Install SmartConsole Utility" button and an installation wizard will guide you through the process. 4. After successfully installing the SmartConsole Utility, you can open the utility by clicking Start > Programs > D-Link SmartConsole Utility. 4