D-Link DG-102SP Product Manual - Page 13
Device Information, BOOTP, IP Address, Subnet Mask, Default Gateway, Host Name
View all D-Link DG-102SP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Using Web-Based Management Management BOOTP: When BOOTP is selected, the VoIP will attempt to obtain its IP settings from a BOOTP server located on your LAN. DHCP: When DHCP is selected, the VoIP will attempt to obtain its IP settings from a DCHP server located on your LAN. IP Address: Enter an IP address for the VoIP gateway. Subnet Mask: Enter a subnet mask for the VoIP gateway. Default Gateway: Enter the IP address of the WAN device (usually a router) you are using to make the WAN connection. Host Name: This is a user-defined host name for this VoIP Gateway. MAC Cloning: Enter the MAC address for MAC Cloning. (This function is not supported on this version) PPPoE Settings (for DSL users) State: Enables or disables the PPPoE function. User Name: Enter the User Name for the PPPoE function. Password: Enter the Password for the PPPoE function. Device Information Device Information window 13