D-Link DES-5016 Product Manual - Page 25
Power
View all D-Link DES-5016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Fast Ethernet Switching System User's Guide Power On The power supply will adjust to the local power source automatically. The DES-5016 may be plugged in without having any or with all LAN segment cables connected. The power plug is located at the rear of the DES-5016. Plug the cable into the wall socket and plug the other end into the DES-5016. There is a power on/ off switch located at the rear of the DES-5016. Move the switch to the on position to power the DES-5016 on. The Power LED will light and all ports will auto negotiate the proper speed and duplex mode when the DES-5016 is powered on. Reboot the DES-5016 if there is a problem. Contact D-Link Systems, Inc. for technical support. Check the configuration of the DES-5016 after a power failure but do not reset unless it is necessary. The DES-5016 can be used with power sources in the range 100 to 240 VAC., 50 to 60 Hz. Installing the DES-5016 17