D-Link DES-3010PA Product Manual - Page 161
D-Link DES-3010PA User Guide, Multicast Global Parameters Settings Auto Learn
UPC - 790069288401
View all D-Link DES-3010PA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
D-Link DES-3010PA User Guide • Auto Learn - Indicates if Auto Learn is enabled on the device. If Auto Learn is enabled, the device automatically learns where other Multicast groups are located. The possible field values are: - Enable - Enables auto learn - Disable - Disables auto learn. • Host Timeout - Indicates the amount of time host waits to receive a message before timing out. The default time is 260 seconds. • Multicast Router Timeout - Indicates the amount of the time the Multicast router waits to receive a message before it times out. The default value is 300 seconds. • Leave Timeout - Indicates the amount of time the host waits, after requesting to leave the IGMP group and not receiving a Join message from another station, before timing out. If a Leave Timeout occurs, the switch notifies the Multicast device to stop sending traffic The Leave Timeout value is either user-defined, or an immediate leave value. The default timeout is 10 seconds. 2. Check the Enable IGMP Snooping Status checkbox. 3. Click . The Multicast Global Parameters Settings Page opens: Figure 98: Multicast Global Parameters Settings Page 4. Modify the VLAN ID, IGMP Status Enable, Auto Learn, Host Timeout, MRouter Timeout, and Leave Timeout fields. 5. Click . The IGMP global parameters are sent, and the device is updated. Page 160