D-Link DES-1316K Manual - Page 41

Set Password, Abnormal*: 50 error packet count within 10 seconds.

Get D-Link DES-1316K PDF manuals and user guides View all D-Link DES-1316K manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Abnormal* Transmit Error: A trap when there is transmit data error in copper port. Abnormal*: 50 error packet count within 10 seconds. u PoE Events: Monitoring the PoE ports status. PoE Power fail: A trap when the port's power source fails or the PD64012 fails. Power on/Power down: A trap when the PoE port's power is on and down. Power over current: A trap when the PoE port's power is over current. Power short circuit: A trap when the PoE port 's power circuit was short. Set Password Password is the invaluable tool for the manager to secure the Web Management Switch. You can use this function to change the password. If you forget the password, press the "Reset" button in the rear panel of the Switch. The current settings including VLAN, Port Settings... etc. will be lost and the Switch will be restored to the default setting. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
41
Abnormal* Transmit Erro
r: A trap when there is transmit data
error in copper port.
Abnormal*: 50 error packet count within 10 seconds.
u
PoE Events:
Monitoring the PoE ports status.
PoE Power fail:
A trap when the port’s power source fails or the
PD64012 fails.
Power on/Power down:
A trap when the PoE port’s power is on
and down.
Power over current:
A trap when the PoE port’s power is over
current.
Power short circuit
: A trap when the PoE port’s power circuit was
short.
Set Password
Password is the invaluable tool for the manager to secure the Web
Management Switch. You can use this function to change the
password.
If you forget the password, press the “Reset” button in the rear panel
of the Switch. The current settings including VLAN, Port Settings…
etc. will be lost and the Switch will be restored to the default setting.