D-Link DCS-8515LH Product Manual - Page 20

Section 3 - mydlink 1 Device Photo Tap to add a customized photo of this device. 2 Device Name Tap to change the device's name. 3 Device Location Tap to change or add a new location for this device. Tap to change the wireless network this device will use to connect 4 Wi-Fi to the Internet. Note: The network must be the same as all your other mydlink devices that you wish to use the same account for. 5 Designated Contact Tap here to add, remove, or edit designated contacts that appear in the rich notification. 6 Camera Microphone Tap to enable or disable picking up sound near your camera in live view and recordings. 7 Motion Setting Tap to further configure sensitivity and the active area of motion detection for the camera. 8 Point to Go This photo is what you will see when you control your viewpoint in the camera's Point to Go live-view. Tap Rescan to scan a new panorama. 9 Auto Home Enable to automatically return your camera to the set 'Home Point' after 60 seconds of inactivity. 10 Night Vision Tap to change night vision detection to On, Off or Auto. 11 Anti-Flicker Reduces flicker in the video. Tap 50 Hz or 60 Hz depending on the frequency of your lights. 12 Pan-Tilt Control Choose whether to control your camera's Point to Go live-view pantilt control by swiping or tapping on the panaroma. 13 Reverse Swipe Direction Tap to reverse the swipe direction. D-Link DCS-8515LH User Manual 1 2 3 4 5 6 7 8 9 10 11 12 13 17