D-Link DAP-1720 User Manual - Page 39
Status, Wi-Fi Name, Password, GHz Extended Wi-Fi, Wi-Fi, Channel, Width, Auto 20/40, Auto 20/40/80 MHz
View all D-Link DAP-1720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Section 3 - Configuration 5 GHz Extended Wi-Fi Status: Enable or disable this network by toggling this slider. Wi-Fi Name This is the name of the DAP-1720's 5 GHz extended network. If using Wi-Fi, (SSID): the DAP-1720 will rebroadcast the uplink router's network under this SSID. You may also manually set the SSID of the extended network. Password: Enter the password or network key that you wish to use for the extended network. Note: If you have selected Ethernet as the existing network, you can configure the following additional settings. For pre-existing Wi-Fi networks, these settings are automatically configured for optimal performance with you existing network. Wi-Fi Select Auto or manually specify a channel for use with this network. Channel: Channel Select Auto 20/40 or Auto 20/40/80 MHz for the bandwidth you wish this Width: network to use. D-Link DAP-1720 User Manual 35