D-Link DAP-1665 User Manual - Page 79
Connecting to a Wireless Client, WPS Button
View all D-Link DAP-1665 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Section 5 - Connecting a Wireless Client Connecting to a Wireless Client WPS Button WPS (Wi-Fi Protected Setup) is a simple and secure way to connect your wireless devices with the DAP-1665 when using Repeater or Wireless Client mode. Most wireless devices such as wireless routers, media players, printers, and cameras will have a WPS button (or a software utility with WPS). Refer to the user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below: Step 1 - Press the WPS button on the DAP-1665 for a minimum of one second. The LED on the device will start to blink. (You can also use the WPS option in the Wi-Fi Setup Wizard as described in the Configuration section.) Step 2 - Within 120 seconds, press the WPS button on your wireless device. Step 3 - Allow up to one minute to connect. When the LED stops blinking and turns solid green, you will be connected and your wireless connection will be secured with WPA2. WPS Button D-Link DAP-1665 User Manual 78