D-Link COVR-2202 User Manual - Page 13
Web Based Installation
View all D-Link COVR-2202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Section 2 - Installation Web Based Installation If you do not wish to use the D-Link Wi-Fi app, you can manually set up your Covr device and configure your Covr Wi-Fi network using the web-based user interface. Step 1 Position the Covr Point labeled A close to your Internet-connected modem and connect an Ethernet cable to the modem and to LAN Port 1 of the Covr Point. Next, connect the power adapter and plug the Covr Point into a power outlet. A LAN Port 1 MODEM Step 2 Wait for Covr Point A to boot up. When the COVR LED starts blinking orange, Wi-Fi wirelessly connect your computer to the Wi-Fi name (SSID) printed on the back of the device, or on the included Quick Install Card. Wi-Fi SSID: Password: Step 3 Type http://covr.local./ into a web browser and follow the on-screen instructions to complete the setup. http://covr.local./ Your Covr device is now set up and ready to use. You can now configure your Covr Wi-Fi settings using the free D-Link Wi-Fi mobile app or the web-based user interface. Refer to the Configuration section on page page 10 for more information on configuring your network using the web-based user interface. D-Link COVR-2202 || COVR-2200 User Manual 9