Compaq dx7300 Redundant Array of Independent Disks (RAID) on HP Compaq dc7700 - Page 37
ume Name, RAID Level, Strip Size
View all Compaq dx7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
14. Click Next. 15. Use the same values you entered in the previous RAID volume confirmation and type the RAID Volume Name, select the RAID Level (for three hard drive RAID 0 or RAID 5 only), and select the Strip Size. NOTE: HP currently supports only the default Strip Size (in this case 64KB). 16. Click Next to see the selection of hard drives that will be part of this RAID volume. 37
37
14.
Click
Next
.
15.
Use the same values you entered in the previous RAID volume confirmation and type the RAID
Vol-
ume Name
, select the
RAID Level
(for three hard drive RAID 0 or RAID 5 only), and select the
Strip Size
.
NOTE
: HP currently supports only the default Strip Size (in this case 64KB).
16.
Click
Next
to see the selection of hard drives that will be part of this RAID volume.