Compaq 470007-798 Guide to Features&Upgrades Compaq Deskpro EN Series of P - Page 21
Using Network Communications
UPC - 720591653163
View all Compaq 470007-798 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2 chapter USING NETWORK COMMUNICATIONS Access to a computer network immediately increases your productivity potential. Your computer is network ready, which means it has an embedded network controller and preinstalled network device drivers. Once the network connection is active, you can share resources such as a printer, exchange information from computer to computer, and run common software programs. The computer is configured, by default, with the following boot order: 1 CD-ROM Drive: Allows the computer to boot from the CD-ROM drive, if present. 2 Diskette Drive: On models with a diskette drive, allows the computer to boot from this drive. On models without a diskette drive, allows the computer to share a diskette drive installed in a second computer connected through a serial cable. If there is no second computer connected, the computer will boot from the internal hard drive. The second computer must have optional FDS software installed in order to establish a serial connection and enable the computer to use the diskette drive. 3 Hard drive: Allows the computer to boot from the internal hard drive. If the internal hard drive does not have operating system software installed on it, the computer will attempt to boot from the network. To bypass the removable media drives and boot directly from the network, turn on or restart the computer. When the F12=Network Service Boot message appears, press F12. 4 Network: Allows the computer to boot from a server running a supported PC LAN management tool in order to set up a new hard drive, reinstall operating system software, or reset the default configuration. Guide to Features & Upgrades 2-1