Compaq 470007-798 Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 15
Installing an Expansion Card, Removing an Expansion Slot Cover
UPC - 720591653163
View all Compaq 470007-798 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installing an Expansion Card Your computer contains expansion slots, as shown in the "Internal Components" section of this chapter. Each slot can accommodate an expansion card up to 6.88 inches (17.48 cm) in length. Removing an Expansion Slot Cover 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, turn off the computer and any external devices, then disconnect the power cord from the power outlet. 3. Remove the access panel. 4. Locate the correct vacant expansion card slot on the back of the computer. 5. Remove the screw at the top of the expansion slot cover, then remove the expansion slot cover from the slot as illustrated. Removing a Screw and Expansion Slot Cover Hardware Reference Guide 2-7