Cobra SC 100 Main Product Image DriveSmarter Apple CarPlay SC 100 Manual - Page 8

Operation Parking Mode Enabling Parking Mode allows your camera to monitor for changes in its internal G-Sensor/ accelerometer. Bumps, Collisions, and break-ins can trigger the G-Sensor to save valuable footage from the moment of impact. If leaving your vehicle off for more than 48 hours (or less if your battery is old) please use the "Auto Surveillance Shutoff" setting to set a time-limit on Motion Detection and prevent your battery from being drained. Note: For Parking Mode to work the camera needs to be connected via hardwire kit (part: CAMICROUSB-003) or be plugged into an 'always on' Cigarette Lighter Socket. You can check if your vehicle has an 'always on' CLA adapter online or in the vehicle's owner's manual. Surveillance Auto Shutoff If leaving your vehicle off for more than 48 hours (or less if your battery is old) please use the "Auto Surveillance Shutoff" setting to set a time-limit on Motion Detection and Parking Mode to prevent your battery from being drained. G-Sensor You can use this setting to set the sensitivity of the G-Sensor from 1-3 or turn it off. Level 1 is the easiest to activate the G-sensor. Level 3 is the setting which will only lock videos when the most severe impacts are detected. Level 1 is recommended for most users. Watermark (Date/Time, Speed, GPS, Driver ID Video Stamp) The watermark settings allow you to toggle having the date/time, speed, GPS coordinates, the Cobra logo and a custom Driver ID be stamped into the bottom of all recorded video. Driver ID Watermark This setting allows you to associate a Driver ID with the camera (for example: John, Employee 12, etc). This allows you to set the name of the driver which will be stamped on the footage as part of the watermark. Exposure Allows you to adjust how light or dark videos and images will appear on the camera. Language This setting allows you to pick the on-screen language for the camera unit. Drive Smarter® Services These settings allow you to select which videos you would like auto-uploaded to the Drive Smarter® app for sharing/review. You can also choose to have Incident Reports sent to your insurance provider, as well as Mayday alerts sent to your Emergency Contact if a severe G-Sensor event is detected. Speed Units Choose between miles/hour or kilometers/hour as the speed unit stamped in the watermark. Volume Allows you to raise and lower the volume of notifications and button beeps from your camera. 13 Operation WDR Enabling Wide Dynamic Range allows your camera to accurately capture footage in very bright conditions. Enabling this feature is recommended for most recording conditions. GPS Format Choose between Decimals and Degrees as the GPS format that is stamped in the watermark. Frequency Choose between 50Hz and 60Hz as your operating frequency if you are experiencing flickering in your video. Format Reminder Choose the recurrence at which you are reminded to format the SD card. Formatting the SD card frequently ensures your videos are protected and the SD card is saving content properly. Delete Videos Reminder Set this to be periodically reminded to free up locked video content so that the camera does not run out of "Emergency Recordings" and "Favorites" space. Restore Defaults Resets the device to factory settings. NOTE: restoring defaults will NOT erase data on your memory card. Format SD Card Allows you to format the inserted SD Card. NOTE: This action will permanently delete all data on the card. It is recommended to format any new card and periodically format existing cards. About You can use this setting to view your cameras electronic serial number including FCC ID number and Industry Canada number. You can also view the manufacture part number and firmware version. 14